Vw T5 Workshop Manual

Please take note that there will be no order deliveries between these dates. Please refer to paragraphs dimensions and weights. Once checked, bleed the brake system.

Consoles have been welded to the longitudinal members, which serve as a means of securing the custom bodies. You can then view and print out the dimension drawing using appropriate software e. The box body should be flush fitted to the cab with flexible mountings. Print manual More details. Changing the steering and braking forces for vehicle conversions for disabled persons is not possible.

Volkswagen Transporter T5 (2003 - 2015)

Online manual A feature-loaded digital edition of the original manual. Printed manual The original and best, delivered to your door. Volkswagen Transporter Instruction Manual pages. Before carrying out welding work on the vehicle, vcf to excel converter full version the vehicle battery should be disconnected.

If uprated springs, comfort springs or tyre sizes that deviate from the standard specifications are fitted, the vehicle and frame heights can change considerably from the base level.

Volkswagen Transporter T5 Manuallines

To do this, unscrew bleed valve. The Online Manual is not a printed product and not a download. If retrofitting electrical or electronic systems, their electromagnetic compatibility should also be checked. Press brake pedal hard until input pressure see data plate of brake pressure limiter device is reached and then adjust output pressure. Modifications to brake system are not permitted!

Free postage in Australia and New Zealand. Sidewall apertures Retrofitting of windows is difficult and expensive. To do this, it should be positioned above the longitudinal members, lead up to the cab and taper out in the front end area.

The following table shows at which height the centre of gravity is permissible on vehicles with standard equipment. Choose the Haynes manual that is right for you with our complete comparison guide.

Volkswagen Transporter T5 Manuallines

Volkswagen T5 other

If using electrical welding equipment, the earth clamp of the equipment should be attached directly to the vehicle part that is to be welded. Modifications can result in changes to the properties of the vehicle. Online manual More details. Modifications other than complete removal are permissible.

If holes have to be drilled in them, this should only be carried out in the neutral zone centre of longitudinal member but with sufficient distance from flange. The installation of a hydraulic tailboard on series production panel vans is not permissible without a special permit from the factory. The electronic version of the body guidelines is the decisive source of up-to-date data on body guidelines online body guidelines. In order to ensure correct provision is made to secure the custom bodies in place, the following precautionary measures have been taken with regards to the construction. The relevant work safety regulations should be observed.

Haynes Manuals

Take your entire manual with you on every journey. Body electrical systems, Wiring diagrams, Reference. Wheelbase mm Wheelbase mm For all perm. Click on the link in question to save the selected file directly to your computer.

VW T5 Workshop ManualYou are hereVolkswagen T5 other

This permit becomes void if any changes to the brake system are made. That is, the connection should not be flush bonded, but carried out in such a way that the twisting movement between box body and cab is not transmitted directly into the cab. To avoid this kind of damage, the wiring harness is separated by a connector in the factory and reconnected on vehicle delivery and handover. The dimensions given in the chassis diagrams is the minimum distance from the upper edge of the longitudinal member to the wheel housings.

VW T5 Workshop Manual

We do it ourselves to help you do-it-yourself, and whatever your mechanical ability, the practical step-by-step explanations, linked to over photos, will help you get the job done right. On box bodies, these should only be covered if new vents are provided, for example, in the cab doors. For modifications to parts that generate noise e. As above but removal and lockable The permissible drawbar load is kg. Partition walls do not have a structural function.

These heights should not be exceeded. The separated bracing elements must be replaced and adapted to the new roof shape.

Volkswagen Transporter T5 (2003 - 2015)

In addition, spacer sleeves should be welded in place. If, with the battery disconnected, concealed cables are damaged, short circuits could result in serious damage. Road handling is considerably impaired.